Dual Fast Charging Motorcycle USB Charger - The upgraded motorcycle phone charger is equipped with 36W USB-C (PD powered) and 18W USB-A (Quick Charge 3.0) dual ports. Quick installation - two installation methods, handlebar installation and rearview mirror installation, can meet the installation and use of most models on the market. (Handlebar mounting is suitable for handlebar diameters 1.9-2.2cm / 0.75-0.87 inches) LED voltmeter - you will know the health of the battery while driving. Automatically monitors the battery and electrical system and indicates the voltage on the screen to avoid power consumption and is easy to use. (Tip: If the voltage is lower than 12V, please replace the battery as soon as possible) Supports multiple output fast charging protocols - PD2.0/PD3.0 (PPS) output protocol; BC1.2 and for Apple protocols; for Qualcomm QC2.0 and QC3.0; for Huawei fast charging protocol FCP; for Samsung fast charging protocol AFC. [Scope of use]: Can be installed on DC12-24V motorcycles, ATVs, tricycles and other transportation tools. [Wiring instructions]: The red wire is connected to the positive terminal + of the battery, and the black wire is connected to the negative terminal - - of the battery. Output voltage and current: 1. USB: 5V/3A, 9V/2A, 12V/1.5A;Type-C: 5V/3A, 9V/3.5A, 12V/3A;USB+ Type-C: 5V/1.7A+5V/1.7A 2. Output interface type: USB+ Type-C:When using dual-port output, you can use any one of the USB ports alone for fast charging output. 3. When dual ports are used at the same time, both ports output 5V, the maximum output of a single port is 5V/3A, the total power of the dual ports is 5V/3.4A, and the dual ports are individually current limited. Color: black Material: Plastic Package Contents: 1 x Motorcycle USB Charger Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.