Applicable to all steering gear signal output devicesServo signal to analog voltage signalRC receiver to analog voltage signalThe PWM signal of the steering gear receiver model is converted into a 0-5V analog voltage signalThe product has 3 channels, which can be connected to the 3-channel PWM signal of the steering gear model receiver at the same time, and convert the PWM signal of the steering gear model receiver into a 0-5V analog voltage signalEquipment controlled by steering gear signal to voltage signal mode, etc.The receiver turns to the voltage mode to control the voltage display, etc.The remote control receiver controls the proportional valve, etc.Rated voltage: Jumper in LOW position: 5VDC0.5V; Jumper in HIGH position: 7VDC to 15VDCRated current: Less than 10mARange: steering gear signal to analog voltage, receiver to voltage output, signal conversionLimit voltage: Jumper in LOW position: 4.5V(MIN) 5.5V(MAX); Jumper in HIGH position: 6V(MIN) 15V(MAX)Colour:redMaterial:PCB+metalSize:27 x 37 x 12mm Package Contents:1 x ConverterOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.