Programming Card RC Car Programming Card LED Program Card ESC Programming Card For ZD Racing

Features 1. Durable: This electronic speed controller programming card is made of plastic, lightweight, compact and lightweight, easy to carry or store. 2. 3 Start Mode: Normal, soft, strong, meeting different demands. Specially designed for brushless electron speed regulator. 3. Special Design: The programming card is designed with connectors, so you can easily connect it to the RC automotive electronic speed controller. 4. Protective: With the function of low voltage cut off, start up mode, maximum braking force, maximum reverse force, and neutral range. 5. Widely Used: RC programming card is suitable for 25A, 35A, 45A, 60A, 80A, 120A brushless electronic speed controller. Specification Item Type: ESC Programming CardMaterial: Plastic, Electronic ComponentsWeight: Approx. 27g / 1ozColor: Silver BlackLow Voltage Cut Off Voltage: 3.1V, 2.9V, 2.7V, Non Protection (Default: 3.1V)Boot Mode: Normal, Soft, StrongMaximum Reverse Force: 25%, 50%, 75%, 100% (Default: 25%)Neutral Range: 9% (Narrow), 6% (Normal), 12% (Wide) (Default: 9%)Maximum Braking Force: (25a, 45a, 60a) 50%, 25%, 75%, 100% (Standard Value 50%, 80a, 120a) 25%, 50%, 75%, 100% (Standard Value 25%)Product Size: Approx. 61x48x6.5mm / 2.4x1.9x0.3inSuitable For 25A 35A 45A 60A 80A 120A Brushless ESCSuitable For 1/8, 1/10, 1/12, 1/14, 1/16, 1/18 Remote Control Car How to Use Method program card: 1. Connect the B and W lines to the programmer and turn on the ESC. (80A 120120A Press the unused key) 2. The green LED flashes twice, then the LED is turned off, that is, the ESC programmer is successfully connected, and the red LED shows the current value item. Otherwise, the connection will fail. 3. Please press ↓ to select another program. 4. Please press → to select different values for the current program. 5. Please press the Program button to confirm the above selection, the green will light up immediately and leave within 5 seconds, that is, the process is successful. 6. Please press the reset button to reset the factory data. Package List 1 x ESC Programming Card Note 1. Due to manual measurement, please allow 1‑3mm error, thank you! 2. Pictures may not reflect the actual color of the item due to differences between different monitors. 3. Do not use the default unprotected value! Lithium battery! When using the lithium battery pack, set the low voltage protection value according to your preference.