Programmable Logic Module Controller Unit 16 in 12 Out 2 Channel 60K High Speed Counting PLC Controller

Feature:1. Powerful Processor: The programmable logic circuits PLC control board features the for WS3U processor with a 32 bits chip, delivering fast computing speeds and ample storage space for efficient operatings.2. Reliable Communicating: With a download speed of 38.4Kbps (can be adjusted to 9.6Kbps in special circumstances), the programmable logic module controller unit supports direct programming, downloading, debugging, and monitoring with for GX Developer or for GX Works2 software.3. Efficient Power Supply: The PLC controller industrial control board operates on DC 24V power supply. It has a static current of 30mA when output relays are not activated, with an increase of 10mA for each activated relay. The total current draw when all relays are open on the for 3U14MR model is 70mA (1.44W).4. Versatile Load Capabilities: Equipped with 5A current relays, the programmable controller relay delay module is designed for long term use below 3A. The transistor based outputs can drive up to 1A of current, with a continuous usage limit of 500mA.5. Comprehensive Features: The PLC programmable logic controller comes with 6 built in analog inputs, 3 voltage inputs ranging from 010V, 3 current inputs ranging from 020mA, and 2 analog outputs (010V voltage). It also includes 2 60K count high speed inputs, support for 3 AB phase inputs, and up to 8 channels of 100K pulse outputs for versatile control and monitoring applications.Specification:Item Type: PLC Control PanelModel: WS3U-28MR-K-BMaterial: ABSSize: Approx. 140 x 100 x 63mm / 5.51 x 3.94 x 2.48inDownload Speed: 38.4KbMemory Capacity: 8000Input Points: 16Output Points: 12Output Type: RelayOutput Current: 5ALoad: 24VHigh Speed Count: 2 Channels 60KPulse Output: NoneAnalog Input, Output: Default 2AD 0-10V, 2DA 0-10V, Can be changed to 4AD.For MODBUS: Built InClock: Built In.Package List:1 x PLC Control BoardNote:Installation and Usage Guidelines:1. To prevent overheating, please install the machine in a wall mounted manner. Sufficient space should be left above and below for heat dissipation.2. Maintain a gap of at least 50mm between the programmable controller host and other equipment or structures. Keep away from high voltage lines, high voltage equipment, and power equipment as much as possible.3. Avoid dust, oil pollution, erosive environments, pay attention to electrostatic guard (avoid direct contacting of hands with circuit board lines).4. Use rubber isolation columns for fixation.