PID Temperature Controller Dual Digital Display Screen Temperature Control Meter AC 220V

Feature:1. [TEMPERATURE CONTROLLER] The thermostat supports a variety of thermocouple and resistance sensors, with a variety of output and alarm modes, and supports 32 segment program.2. [SIMPLE OPERATION] The operation process of the thermostat is very simple, allowing quick setting of definite values without the need to operate further steps.3. [WIDE APPLICATION] The thermostat can be flexibly used in various industrial automation control situations, such as printing, chemical and plastic manufacturing.4. [DIGITAL DISPLAY] The thermostat has a dual display window that shows both the measured temperature and the set temperature.5. [STRONG COMPATIBILITY] The thermostat is compatible with four input signals, and the adjustment menu parameters can be switched at will.Specification:Item Type: PID Temperature ControllerMaterial: ABSPower Supply Voltage: AC 220VInput Signal: Four input signals are compatible, adjust the menu parameters to switch at will.1. K type thermocouple measurement range: -60-840 (+ cold end compensation temperature)2. PT100 measurement range: -50-450 3. 0-10V analog input4. 4-20ma cross proportional inputMounting Size: Approx. 44 x 44 x 100mm / 1.7 x 1.7 x 3.9inOutput Signal: Relay outputPID: SupportCommunication: RS485Baud Rate: 1.2K, 2.4K, 4.8K, 9.6K, 19.2K, 38.4KAlarm Mode:1. Upper and lower limit alarm2. Positive and negative deviation alarm3. In area alarm 4. Out of area alarm5. No alarmAccuracy:Thermocouple: 1.5 or the greater of (0.2%FS)Platinum Resistance: 1 or the greater of (0.2%FS)Temperature Display: 0.1Sampling Speed: 8 times / secondProgram Mode: SupportNumber of Program Segments: 32 segmentsApplications: Printing, chemical, plastic, building materials, household, packaging, textile, food, metallurgy, etc. in manufacturing.Package List:1 x PID Temperature Controller