Picoboot Board Kit +sd2sp2 Pro Adapter For Raspberry Picoboot Pi Pico Board Replacement Modchip For

1) The board includes an 16MB QSPI FLASH, and can support other SPI flash chip up to 512MB . 2) Onboard TD6810TR regulator chip, the 3.3v operating of the module can pass up to 500MA current. 3) with the for pins, it can completely replace the pico. 4) One-key Reset , button, easy to use. 5) USB TYPE-C interface supported by mainstream devices. 6) RP2040 microcontroller chip designed by for . 7) Dual-core Arm M0+ processor, flexible clock running up to 133 MHz. 8) Castellated module allows soldering direct to boards. 9) Low-power sleep and dormant modes. 10) Drag-and-drop programming using storage over USB. 11) 26 x multi-function GPIO pins. 12) 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit , 16 x controllable PWM channels. 13) Accurate clock and timer on-chip. 14) Temperature sensor. 15) Accelerated floating-point libraries on-chip. 16) 8 x Programmable I/O (PIO) state machines for custom peripheral support. The Pico is a microcontroller board based on the for RP2040 microcontroller chip. It has been designed to be a low-cost, high-performance microcontroller board with flexible digital interfaces. The Pico features two ARM -M0+ cores run up to 133MHz; 256KB RAM; 30 GPIO pins; and a broad range of interfacing . This is paired with 16MB of onboard QSPI Flash memory for code and data storage. Maximum operating current up to 500 mA.It is compatible with for Rasberry Pi C/C++ , -python . Colour:purple Material:PCB+plastic Package Contents: 1 x picoboot kit 1 x SD2SP2 PRO Adapter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.