Item Type: PEI Steel Sheet Material: Steel Print Reference Temperature: 1.PLA: (both sides are fine) Hot Bed: 50-60 Nozzle: 200-210 Hot bed 60, nozzle 210 2. ABS (powder surface is recommended. After temperature exceeds 80, the smooth surface is easy to foam) Hot Bed: 70-120 Nozzle: 240-250 3. PETG: (both sides are fine) Hot Bed: 60-85 Nozzle: 230-245 4. Carbon fiber (both sides are fine, very close to PLA, hardened steel is recommended for the nozzle) Hot Bed: 50-60 Nozzle: 200-220 5. TPU: (both sides are fine) Hot Bed: 50-60 Nozzle: 200-220 Hot bed 60, nozzle 220 6. Wood (both sides are fine, very close to PLA): Hot Bed: 50-60 Nozzle: 200-220 Package List 1 x Golden Different Face Steel Plate 1 x Magnetic Sticker B Side + PEI(attached together) 1. The steel plate is an elastic steel plate, and the printing plate needs to be flat when used, and the magnetic attraction is strong, which can firmly adsorb the plate on the plate.2. The first layer sprinklers should not scratch the platform, otherwise the sprinklers will scratch the platform and wear out the sprinklers.3. When printing the first layer, the nozzle should not be too far away from the platform, otherwise it will not stick to the printing platform, and the gap between the nozzle and the steel plate should be about a piece of A4 paper.4. The model cooling fan cannot be turned on for the first layer printing, otherwise it will affect the adhesion of the first layer printing.5. Add a skirt when printing a model with a small contact surface. 1MEET TWO PRINTING REQUIREMENTS: Possess both smooth and powder sides, one steel plate can meet two printing requirements 2HIGH TEMPERATURE RESISTANCE: Good quality magnets can easily withstand temperatures up to 130. Very suitable for PETG and ABS materials 3SPRING STEEL MATERIAL: Adopt excellent spring steel material, can be bent thousands of times without deformation, very tough 4CLEAR PRINT TEXTURE: Come with clear print texture with powder surface, possess characteristics, very practical 5VERY EASY TO USE: This double sided coated bed sheet is very easy to use, the size is 310x310mm, suitable for the same size building board