Features 1、Compatibility: This adapter board is designed for Pi5, supports 2230 2242 2280 M.2 hard disk, supports for Gen2 Gen3 modes, supports booting the for PI5 device from SSDs. 2、High Speed: Supports NVMe protocol M.2 interface hard disk protocol, realizing high speed reading and writing, improving work efficiency, and allowing users to enjoy a faster and more efficient experience. 3、Multiple Uses: SSD can be used as a boot disk or additional storage, and can be used separately for storage expansion. At the same time the system can boot from small memory card. 4、Power Supply Design: The power supply circuit is designed with 2A current, limited by the PCle interface current limit (5V1A) of for PI5, and is able to provide more than 3.3V 1.5A output to the SSD. 5、Current: Typically SSDs can be rated at 2.5A, 2.7A or even 3A, but these currents correspond to the limits of the X4 mode. Since for PI5 only supports X1 mode, the actual current used is much less than the rated current. Specification Item Type: PCIe to M.2 M Key Adapter Board Material: PCB Support: 2230 2242 2280 NVME M2 SSD Disks Support: NVMe Protocol M.2 Interface Hard Disk Protocol Support: PClex1, Support for Gen2 Gen3 Modes Support: for PI 5 Package List 1 x PCIe to M.2 M Key Adapter Board 1 x Cable 1 x Screw Kit