Extra tools are required for installation. Replace and update your seat occupancy sensor. This emulator activates in the same way as the original sensor, regardless of whether someone is seated. After installing the emulator, the SRS warning light on the dashboard can be cleared using a diagnostic computer (required for initial setup). Name: Car Seat Occupancy Mat Sensor SRS Bypass Emulator Fitment Type: Direct Replacement Installation Compatible with the following European models (including all variants: convertible, coupe, estate, hatchback, M-Power, saloon): For models 1997–2016: - 1997–2003: E31, E36, E38, E39, E46, E53, etc. - 2003–2007: E60, E63, E65, E66, E87, E90, etc. - 2007–2010: E60, E63, E64, E65, E70, E71, E81, E87, E90, E92, E93, etc. - 2010–2016: X5, X6 Instructions: Step 1: Open the emulator top cover and adjust the switch. Step 2: Locate the seat occupancy sensor under the front passenger seat, cut the wire, and connect it to the emulator. Step 3: Fasten the front passenger seat belt and use a diagnostic computer (not included) to clear the SRS warning code during initial setup. Notes: 1. Please confirm compatibility with your vehicle before ordering. 2. Professional installation is highly recommended. 3. Once installed, the emulator will send a continuous occupancy signal to the OBC, regardless of actual occupancy. Installation guide not included. Professional installation is strongly advised. Color: As shown Material: Plastic Package Contents: 1 x Car Seat Occupancy Bypass Emulator Mat Sensor Note: Light reflection and display differences may cause slight color variations between the image and the actual item. Measurement may vary by +/- 1–3 cm.