Feature: 1. The kit contains a paper cutter and a scratching knife, and the cutting is incisive and the scale is accurate, suitable for office DIY cutting. 2. Equipped with a sliding floating cutter head, the starting cutting position can be selected at will, and the sliding cutting is fast and efficient. 3. The double scale panel design is convenient for positioning and cutting and positioning the scratch spacing. 4. Can make scratches on paper of different thicknesses, and adjust the angle of the paper and the scratches to make scratches in different directions. 5. Folding design, storage freely, easy to operate and does not occupy desktop space. Specification: Item Type: Paper Cutter Material: Plastic + ABS Expanded Size: Approx. 35.9 x 34.2cm / 14.1 x 13.5in Closed Size: Approx. 17.4 x 36 x 4.2cm / 6.9 x 14.2 x 1.7in (including cutter head height) (manually measured, there may be minor errors) Cut Number: 10 pieces (A4 paper) Cutting Width: Approx. 310mm / 12.2in Cutting Thickness: Approx. 1mm / 0.04in Replace Operation: After the cutter head is centered, open the gap of the bead and then take it out and replace it How to Use: 1. Raise the pressure bar 2. Insert the paper to determine the cutting position 3. Press the cutter head down to push the cutting to complete. Package List: 1 x Paper Cutter 1 x Scratch Knife Note: When cutting hard and thick materials, the number of sheets should be reduced to ensure the cutting effect.Pay attention to the thickness and pressure of the paper for scratches, so as not to scratch the paper.