1. Latest ELM327 version for improved Ford compatibility 2. Modified design includes a switch to connect to different CAN buses 3. Designed for use with FORScan software 4. Compatible with software applications: FORScan, Elmconfig (supports Baud rate: 34800, please verify before purchase), FF2, and FoCCCus, among others Basic Features: Reset fault/trouble codes/parameter IDs (PIDs), change vehicle configuration data, run tests, perform service procedures Supports MS CAN bus and HS CAN bus ELM327 USB 25k80 with switch for Ford diagnostic cable Product Introduction: This ELM327 OBDII OBD2 USB cable features a switch and is designed for communication with Ford and Mazda vehicles. When used with compatible software, it can detect modules not accessible to standard OBD2 scanners. It enables viewing of trouble codes, PIDs, running tests, and performing service procedures that are typically unavailable through conventional OBD2 tools and basic ELM327 devices. Pin Configurations: Switch outside: HS CAN – uses pins 6 and 14 Switch inside: MS CAN – uses pins 3 and 11 Supported Software: FORScan Elmconfig (supports Baud rate: 34800, please verify before purchase) FoCCCus Modified ELM327 Information: Many Ford and Mazda models from approximately 2003–2004 onward are equipped with an MS CAN bus in addition to the standard HS CAN bus. Unlike HS CAN, which complies with OBD2 standards and uses pins 6 and 14, MS CAN operates on non-OBD2 pins (3 and 11) and is not supported by standard ELM327 devices due to its manufacturer-specific nature. This device has been modified to support MS CAN bus functionality while maintaining full HS CAN compatibility. Color: As shown Material: ABS Package Contents: 1 x Diagnostic Scan Tool Note: Only the items listed above are included; other accessories are not part of the package