Item Type: AIS Pilot Plug Data Cable Material: ABS, cable Introduction: This AIS Pilot Plug USB Data Cable provides a simple and easy way to connect Ais Pilot Plug to your computer, laptop, or pocket PC, work with Marine Navigation Software to show your own ship and surrounding ship's information. Data Flow (Own Vessel, Others Vessels Data): Position (Lat Long) Speed (SOG) Course (COG) Heading (If Gyro and, or Magnetic Compass Connected to AIS device) Navigation Status (Underway, Drifting, At Anchor etc.) Ship's Name - MMSI Codes - Call Signs Port of Departure Arrival, ETA Information, Vessel Length etc. How to use: 1.Plug USB Port to your Computer , Plug in AIS Pilot Plug to Universal AIS Pilot Plug output. 2.For the first time, install Cable driver Silicon Labs CP210x, (if not installed automatically by OS) 3.Set NMEA 183, Baud rate 38400 System Requirement: For Windows 10/8/7/Vista/XP/2000 (for Windows 7,8,10 should auto detect and install the drivers) - for OS X 10.6 and above (Both computer and device must support macOS) - for Linux kernels 2.4.31 Package List 1 x AIS Pilot Plug Data Cable 1AIS Data Cable: Provide connection on every merchant vessel that has AIS device and Universal AIS Pilot Plug output to see vessel AIS targets on your navigation software. 2Main Function: This AIS pilot plug USB data cable provides a simple way to connect your computer with marine navigation software, to show your ship and surrounding ship's information. 3Ship Information: The AIS pilot plug usb data cable could show the position, speed, course, heading, navigation status, ship's name and other informations. 4Easy to Use: Plug USB Port to your Computer, then plug in AIS Pilot Plug to Universal AIS Pilot Plug output. Install Cable driver Silicon Labs CP210x. Set NMEA 183, Baud rate 38400. 5System Requirement: Applicable for Windows 10 8 7 Vista XP 2000, applicable for OS X 10.6 and above, applicable for Linux kernels 2.4.31.