NGFF SSD Solid State Drive to SATA3 Riser Adapter Converter Card Black

Features 1、The speed and other properties is not changed,only form conversion interface. 2、Support the 22*30 mm/22*42 mm/22*60 mm/22*80 mm size of M.2 NGFF (SATA) SSD. 3、You can connect it to desktop or laptop. 4、Transparent to the operating system and does not require any software drivers. 5、There are SATA transfer mode. Specification Features: 1. The speed and other properties is not changed,only form conversion interface. 2. Support the 22*30 mm/22*42 mm/22*60 mm/22*80 mm size of M.2 NGFF (SATA) SSD. 3. You can connect it to desktop or laptop. 4. Transparent to the operating system and does not require any software drivers. 5. There are SATA transfer mode. Specification: Condition: Brand new Material: plastic Size: Approx. 10*7*0.7cm/3.94*2.76*0.28inch Iterfation:M.2 NGFF to 2.5inch SATA Package List: 1 * NGFF SSD To 2.5 SATA Adapter Card Case 1 * Screws(1 bag) (Default send 22*80 and Packed Safely in Bubble Bag) Note: Only supports SSD interface: B-KEY (SATA protocol). B key M.2 NGFF PCI-E 2X transfer mode SSD and M key M.2 NGFF SSD don't support! The design of four fixation installation location for the adapter card,the fixeg default location in 22*80mm size place,there is a copper cylinder in a bag, if is other size of the ssd,placing copper cylinder in the appropriate place. Please cancel the hard disk password if your hard drive set a password in the original computer, The other computer doesn't recognize the hard disk if the password not cancel Please allow minor error due to manual measurement. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Package List