Item Type:3 Phase VFD Model: NF9100-3T-00075G Input Power: Single Phase AC380V20% 50/60Hz Output Voltage: Three-Phase AC380V Output Voltage Regulation Mode: PWM Control Control Method: Voltage Vector Adapted Motor Power: 0.75KW Rated Current: 10A Frequency Control Range: 0-650Hz Protection Level: IP20 Installation Method: Wall-Mounted Size:80 x 160 x 135mm / 3.15 x 6.3 x 5.31in Mounting Size and Hole Size:76 x 150mm / 3 x 5.9in =5mm / 0.2in Protection Function: Overvoltage, undervoltage, current limiting, overcurrent, overload, electronic thermal relay, overheating, overvoltage stall, data protection, low frequency warning. Application: 1, The control speed on the material rack 2, synchronous operation on the pipe machine 3. Energy-saving renovation on air compressor Package List 1 x Variable-Frequency Drive 1 x Users Manual(English) 1Voltage vector type control which is very accurate. 2The control port is complete. It can be used in all kinds of automation equipment with PLC and sensor. 3Built-in PID controller, can be used in situations requiring constant pressure, constant temperature, constant tension open-loop control and closed-loop control. 4Textile swing function, can be used in textile machinery. 5Has built-in synchronous control function. 0 speed lock function, can be used for truck crane and other occasions. 6Soft-start function, protective equipment and power grid. 7Application of high-speed spindle, such as high-frequency control function, textile engraving machine, etc.