Nano VNA Upgrade 50K-6.3GHz Vna Net Splitter Program LiteVNA 6G Multi-Function Vector Network Analy

LiteVNA is integrated on the basis of the acclaimed and SAA2. Now you can get a portable vector network analyzer (VNA) that is as small as the and can meet the ultra-wide measurement range of 50kHz-6.3GH.In order to reduce power consumption and size as much as possible, LiteVNA only uses one mixer, which can be switched by the internal RF switch to measure S11 and S21, and can perform TDR and DTF measurements after IFFT calculation.The design of LiteVNA fully considers the opinions of the community. In addition to a measurement range, the current LiteVNA also brings faster scanning speed and more scanning points, combined with the same easy-to-use operation interface as , now It is very convenient to use LiteVNA as a tool for on-site testing.LiteVNA includes a -SD slot, you can save test data or screen to the -SD card at any time. The measurement range up to 6.3GHz, in addition to meeting common amateur radio and Internet of Things applications, can also cope with emerging 5GHZ tests, and can apply the latest 5.8GHz wifi and 5.8GHz image transmission.In order to reduce power consumption as much as possible, LiteVNA uses a switching power supply. When an external power supply is connected, the frequency of the external power supply and the frequency of the switching power supply may resonate and generate random noise. -SD card needs to support SPI mode, the maximum capacity supports 32GB, and only supports FAT and FAT32 formatsDescription: Type: Vector Network Analyzersize: 18 x 8 x 2cmMaterial: plasticcolour: blackPackage Contents: 1 x LiteVNA host2 x 30cm SMA male to male SS405 RF cable1 x SMA female to female connector1 x SMA simple calibration kit SHORT1 x SMA simple calibration kit OPEN1 x SMA simple calibration kit LOAD1 x USB Type-C data cable1 x touch padOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.