["Description:\nbrand new and high quality.\nFeature:\nThis is a multi-functional universal driver board, 30 pin interface, only need to brush a program, all kinds of screen resolution can be used at the same time.\nSupport wide voltage input, and can work normally between 5V-20V (but need to consider the voltage requirements of external equipment, so as not to damage the externally connected equipment or accessories, this working voltage is only applicable to this driver board).\nStandard backlight 6PIN, interface, external screen line definition.\nStandard EDP-30PIN output, support resolution below 1920x1200.\nSupport HDMI-compatible upgrade or 4P standard IIC upgrade.\nStandard HDMI-compatible large-port universal connector.\nUsing high temperature components, can be used in high temperature environment for a long time, but need to pay attention to ventilation.\nSupport remote control function.\nSupport multi-screen parameter selection, maximum support for the corresponding resolution of 10 kinds of LCD screen, no need to write another program.\nDo not need to update the driver, directly use the jump cap way, you can directly select a variety of resolution screen parameters, support multi-screen ginseng jumper selection, 1920 × 1200, 1920x1080, 1600 × 900, 1366 × 768, 1280 ×800, five common resolution LCD screens on the market.\n\nSpecifications:\nItem Type: Driver Board\nMaterial: Plastic+Metal\nSize: 73x54mm/2.8x2.1in\nColor: Green\nQuantity: 1 Set\n\nNote:\nNo retail package.\nTransition: 1cm=10mm=0.39inch\nPlease allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.\nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Includes:\n1 x Driver Board\n2 x Cable"]