The MT6826S provides an incremental ABZ output interface to replace traditional optical encoders. The maximum resolution of the incremental output is 4,096 pulses/revolution, or 16.384 steps. The MT6826S also provides an incremental UVW output with a resolution of 1 to 16 pole pairs/revolution. The MT6826S provides a 4-wire SPI interface for a host computer or MCU to read the 15-bit absolute angle value within the chip. The single-wire PWM output also provides absolute angle data with 12-bit resolution. The MT6826S's core performance improvement lies in its convenient self-calibration mode. This mode compensates for nonlinearities caused by imperfect magnets and structural installation deviations, significantly improving INL characteristics. Operating Voltage: 3.3V-5.0V Maximum Supported Speed: Less than 120,000 RPM PWM Output: 12-bit Operating Temperature: -40C-125C ABZ Incremental Output: 1-4096 lines (programmable) UVW Incremental Output: 1-16 poles (programmable) Absolute Angle Resolution: 15-bit System Delay (Constant Speed): 2us-10us Communication Interface: 4-wire SPI Color: Blue Material: PCB Package Contents: 1 x Magnetic Encoder 1 x Magnet 2 x cable Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.