MPPT Wind Turbine Charging Controller Waterproof MPPT Boost Wind Generator Controller

Feature:1. MPPT Boost Charging Function: This wind turbine controller adopts boost MPPT technology to make it charge continuously and efficiently. At low wind speed, the wind turbine input voltage is lower than the battery, MPPT function can help solve this problem and can allow the wind turbine to be able to charge the battery at low wind speed and low RPM.2. Comprehensive Protection: MPPT boost controller is available for 300800W wind turbines. Helps to automatically control wind turbine charging batteries. When the battery is fully charged, the brake can automatically take effect.3. Fast Heat Dissipation: The controller adopts heat dissipation wind tunnel with heightened design, which effectively solves the heat dissipation problem of the controller in the case of high current charging. Safe and stable working condition, with heat conductive silicone potting treatment, sealed and waterproof, dustproof, anti circuit oxidation.4. Automatic: The wind turbine controller can automatically match 12V or 24V battery. It controls the voltage and current limits during charging to ensure the best charging effect. At the same time, it provides maximum protection for the wind turbine and the battery.5. Clear LED Indicator: The wind turbine controller has LED indicators to clearly view the working status of the controller. The rating reaches IP67 or above for full waterproof protection. Also includes automatic overvoltage braking, battery reverse connection and open circuit protection.Specification:Item Type: MPPT Boost ControllerMaterial: Aluminum AlloyCharging Mode: Even ChargingVoltage: 12V 24VProtection Levels: IP67Protection Function: Battery And Temperature ProtectionStatic Current: 15mAFan Input Power: 300W-800WApplicable Battery: Acid, ColloidProtection Mode: Overcharge Protection, Reverse Connection Protection, Short Circuit Protection, High Temperature Protection, Overload, Lightning Protection, Fan Current Limit, Automatic BrakeDisplay Mode: LED IndicationFan Boost Starting Voltage: 6V (12V Battery), 12V (24V Battery)Battery Overcharge Protection Voltage: 14.4V (12V Battery), 28.8V (24V Battery)Exit Overcharge Protection: 13.6V (12V Battery) 27.6V (24V Battery)Working Environment Temperature: -35-70LED Indicator Status Indication Content StatusFunctionGreenFan Charging Indication Always OffFan Not Connected Or No Wind StateAlways OnFan Charging StatusRedFan Brake IndicationNormally OffController Works NormallyAlways OnBattery Over Voltage Or Over Temperature Protection.Package List:1 x ControllerNote:Temperature protection function: Temperature protection is to detect the temperature of the controller component. When the temperature of the component is too high, the fan begins to unload to prevent the controller temperature from damaging the hardware.