Wind Generator Controller 12/24V 800W MPPT Wind Charge Controller for Wind Turbine System Automatically charges the battery. The controller features an integrated rectifier and brake circuit module, offering improved heat dissipation and reliability compared to traditional designs. It has a fully sealed, waterproof construction with IP67 protection rating, allowing long-term operation even when submerged in water. Note: Ensure the wind turbine generator output voltage matches the battery's rated voltage. Connect wires in the correct order: first connect the battery's positive and negative terminals to the controller, then connect the wind turbine's three-phase output. Follow instructions carefully when connecting the battery and wind turbine to the controller. Reversing polarity or incorrect wiring may cause system malfunction or permanent damage to the controller. Wiring Instructions: 1. Connect the battery's positive and negative terminals to the red (positive) and black (negative) battery terminals on the controller. 2. Connect the wind turbine's three-phase output wires to the three-phase input (green wires) on the controller. Specifications: - Maximum input AC voltage: AC35V - Output voltage: 12V / 24V - Battery charging cut-off voltage: 14.5V ±0.3V / 29V ±0.3V - Maximum charging current: 15A (12V), 10A (24V) - Wind generator speed limit voltage: 14.5V ±0.3V / 29V ±0.3V - Protection level: IP67 - Static power consumption: 0.008A - Maximum load power: 800W - Maximum allowable wind speed: 12 m/s - Operating temperature range: -35°C to 65°C - Input wiring: Three-wire system - Control mode: Auto-detect 12V/24V - Installation: Bolt-on mounting - Warning: Do not reverse polarity to prevent damage Application: Suitable for small-scale wind power systems Color: Blue Material: Aluminum alloy Package Includes: 1 x MPPT Wind Generator Controller Note: Other items not included. Color may vary slightly due to lighting and display differences. Measurement tolerance: ±1–3 cm.