Mouse Mover Undetectable With Timer, Silent Mouse Jiggler With On/off Switch

Product name: Carbon fiber pattern mouse mover Product material: ABS.PC Net product weight: 93g Product gross amount; 112g Product size: length 92.8mm*123.6mm*16.5mm Packaging size; length 94mm*125mm*17.5mm Power supply interface: USB-Type-C Operating voltage: 5V Operating current: less than 500mA Operating temperature: 5℃-40℃ Scheduled working hours: 0.5 hours/1 hour/2 hours/4 hours 2 Functions: 1. Use a Type-C power cord to connect this product to a computer or adapter (adapter power: 5V/1A). 2. Place the mouse on this product and aim the sensor light at the bottom of the mouse at the moving turntable of this product. 3. It is powered off by default, the turntable does not rotate, and all lights are turned off. 4. Master switch: Press once to turn on, the turntable will rotate, and the blue light will turn on. Press again to turn off, the turntable will stop rotating, and the light will turn off. 5. Pause: When the main switch is on, press the turntable briefly to stop rotating, and press the turntable again to restart. 6. Lighting: Short press to switch the light mode. There are many modes to choose from, such as blue, green, red, breathing light, etc. Long press to turn off the light. If there is a timer, the green timing indicator light will not be turned off. 7. Timing: Timing is turned off by default after power-on, and the green indicator light does not light up. Short press to select the timing time. If 1 indicator light is on, it means the timer is 0.5 hours, if 2 indicator lights are on, it means the timer is 1 hour, if 3 indicator lights are on, it means the timer is 2 hours, if 4 indicators are on, it means the timer is 4 hours, if all green indicators are off, it means the timer function is off. Notes: 1. This product should be placed flat on the computer table, pay attention to the placement direction. 2. Please note that this product should be placed in a position where it is not easy to slip to avoid damage caused by accidentally falling from the computer table. 3. When using the product, place the mouse on the product, and the sensor light at the bottom of the mouse must be aligned with the rotating dial of the product. 4. This product is only compatible with optical mice. Checklist: 1*Mouse Mover