BUFFER UTILITY - There are so many reasons to add the Buffered Splitter to your pedalboard. But the most important one is great tone. If you've ever split your guitar's signal with a passive device, adapter, or even certain effects pedals, you know that the results can sometimes be less than stellar. This happens because many of those products simply cut your tone in two, sending one half one way and the other half the other way. You can end up with a tone that is muddy and lifeless. Adding our Buffered Splitter to your chain not only avoids these issues, but it will drive your long cable runs and pedalboard chains as well. Trust us on this one. If you need to split your signal for any host of reasons, putting our Buffered Splitter on your board will give you your tone back. SIMPLE AND EFFECTIVE SIGNAL-SPLITTING DEVICE - There are a ton of applications for adding a Buffered Splitter to your signal chain. Whether moving a tuner out of line or running a dual-amp setup, once you use the Buffered Splitter, you'll never be without one again. Here are just a few options. Send one signal to a tuner that is out of the signal chain while retaining your full tone. In a dual-amp setup, both amplifiers will see a powerful, clean signal. KEEPS YOUR TONE CLEAR, POWERFUL, AND PRISTINE - Converts your guitar's hi-Z signal to lo-Z for driving long cables and pedal chains. Retains the original-tone of your guitar without coloration from the other gear in your signal chain. Colour:Black Material:aluminum alloy Package Contents: 1 * Buffered Splitter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.