Molding Electronic Ruler Pull Rod Displacement Sensor Universal Hardware PartsKTC-650

Features 1、With high compatibility, electronic ruler adpots potentiometer principle, and it is also with 0-100% given input voltage which changes with displacement. 2、Adopt plug for Hirschmann to resist oxidation, the displacement sensor is exquisite workmanship, which can reduce signal transmission loss. 3、Support high-definition sound quality, such kind of measurement tool is compatible with all equipment. 4、And this ruler adopts plug type, convenient and practical, no noise, with smooth output engineering rod. 5、Via precision craft by many experts, this displacement sensor is entitled with high performance according to strict rule. Specification Item Type: Electronic ruler Product Material: Stainless steel Product Model: KTC-450 / KTC-650 (optional) Electrical Stroke: Range + 3mm Resolution: Infinite uninterrupted analysis Repeatability: 0.01mm Normal Working Current of Sliding Brush: ≤10μA The Maximum Current of Sliding Brush When Causing Fault: 10mA Maximum Allowable Working Voltage: 42V Effective Temperature Coefficient Ratio of Output Voltage to Input Voltage: Usually 5ppm / K Insulation Resistance (500VDC, 50Hz): ≥10MΩ Insulation Strength (500VAC, 50Hz): ≤100μA Shell Length (A): Range + 78.5mm Mechanical Stroke (B): Range + 8mm Maximum Load of Pull Rod: 50KG Work Force: Horizontal Direction: <10N Vertical Direction: ≤10N Vibration Resistance Standard: 5 ... 2000Hz, Amax = 0.8mm, amax = 20g Damper Resistance Standard: 50g, 11ms Operating Temperature Range: -60 ... + 150 ℃ Life:> 100 × 10 ^ 6 times Maximum Operating Rate: 10m / S, maximum operating acceleration 10m / s² Protection Level: The highest IP67 (DIN40500 / IEC529) Package List 1 x Displacement Sensor 1 x Plug 3 x Accessory 4 x Screw