Features 1、Adopt absorbing material, environmental protection harmless material, quality is durable, service life is long. 2、A variety of scene Settings, you can adjust the different lights, and the lighting control is very sensitive. 3、Easy to use, simply put the remote control socket on the receiver's available channel, and then control the lighting switch through the corresponding channel on the remote control, you can easily use the lighting control. 4、Each time press the third channel switch twice or press the third channel button twice, 12.4V voltage /1A output can be connected to another device within the scope of current and voltage authorization. 5、Light control supports high voltage receiver. Do not short circuit the output terminal, otherwise the lighting control will be damaged. 6、Easy to install, small in size and light in weight, without adding extra weight to the remote control car. Suitable for TRAXXAS/HSP/Redcat/Tamiya/axial SCX10 D90 HPI RC headlights. Condition: 100% Brand New Item Type: RC Light Control Line Material: Plastic + Rubber Color: As Pictures Shown Weight: Approx. 8g/0.3oz Type: RC Model Accessory Maximum Current: 1A Power Supply Type: Independent Power Supply Compatible: Suitable for Traxxas/hsp/redcat/tamiya/axial Scx10 D90 Hpi RC Headlights. Independent Power Supply: the First Maximum Current of 5-12.4V Power Supply Output Light Sets: 4 Sets of 1234 Lights, Parallel 1 and 2, Parallel 3 and 4. It Can Be Understood As 2 Sets of Exit Lights, Forming 4 Interfaces. Scenario A: when the Power Starts, 1 and 2 Turn Off, While 3 and 4 Turn Off Scene B: Click the Remote Control 1 and 2 to Light Up, While the Remote Control 3 and 4 Are Not Light Up Scene C: Click the Remote Controls 1 and 2 Not to Light Up, Click 3 and 4 to Light Up Scene D: Click the Remote Controls 1 and 2 Light Up, Click 3 and 4 Light Up Scene E: Press 1, 2, 3, and 4 to Close Again, then Enter Scene B in Turn. Package List 1 x Light Control Line