Mesh cover: It is composed of a special single-living metal mesh and abs plastic, which can replace different mesh covers to adapt to planting different sizes of grass needles. Product material: special anti-rust treatment on the of the metal steel mesh, , not easy to rust, the body uses ABS engineering plastic shell. The handle body is comfortable, the size is moderate, and the ergonomic feel is good. The product is shipped without batteries, and uses 2 AA batteries, so you need to bring your own batteries! With increased voltage, the grass needles are easier to stand upright, and it is better to handle longer grass needles. Positive wire (short wire), negative wire (alligator clip wire). First unscrew the net cover and pour the required needles into the transparent container (about 1/3 is enough) Then tighten the mesh cover (note! Make sure that the positive contact in the container can Contact the metal mesh of the mesh cover) Then apply white latex to the required grass facade Clamp the negative contact (plastic sleeve) next to the facade where you need to plant the grass Then put the net cover (the part of the grass exit) to the desired planting position, the distance is about 3-5cm Turn the power switch to the "ON" position, and then press the middle oval button to switch the operation. (At this time, the metal mesh be energized with 5000V DC high voltage current, do not Contact it). After use, release the oval button switch and the work light go out. Colour: as shown Material: ABS Package Contents: 1 x solar panel grass planter 1 x brush 1 pack x valley dark green 1 pack x wild east green Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.