Miniature Landscape Model Material Flocking Static Grass Applicator Modeling Hobby Craft Accessorie

Mesh cover: It is composed of a single-living metal mesh and abs plastic, which can replace different mesh covers to adapt to planting different sizes of grass needles. Product material: anti-rust treatment on the surface of the metal steel mesh, durable, not easy to rust, the body uses ABS engineering plastic shell. The handle body is comfortable, the size is moderate, and the ergonomic feel is good. Charging function: Built-in rechargeable high-capacity 400 mA and maintenance-free battery charging circuit has a service life of more than 500 . With increased voltage, the grass needles are easier to stand , and it is better to handle grass needles. Positive wire (short wire), negative wire (alligator clip wire). First unscrew the net cover and pour the required needles into the transparent container (about 1/3 is enough) Then tighten the mesh cover (note Make that the positive contact in the container can Contact the metal mesh of the mesh cover) Then apply white latex to the required grass facade Clamp the negative contact (plastic sleeve) to the facade where you need to plant the grass Then put the net cover (the part of the grass exit) to the planting position, the distance is about 3-5cm Turn the power switch to the "ON" position, and then press the middle oval button to switch the operation. (At this time, the metal mesh will be energized with 5000V DC high voltage current, do not Contact it). After use, release the oval button switch and the work light will go out. Colour: as shown Material: ABS Package Contents: 1 x solar panel grass planter 1 x brush 1 pack x valley dark green 1 pack x green Only the above package content, other are not included. Note: Light reflection and different displays may cause the color of the item in the a little different fr the real thing. The measurement allowed is +/- 1-3cm.