Feature:1. Ultra-small intelligent constant temperature heating table2. Eliminate redundancy, reserve enough effective heating area, greatly save energy consumption and heating time3. Efficient heating area, lower energy consumption, wide range of applications, screen display and temperature control4. Centralized preheating of running components to reduce damage to nearby components5. USB Type-C interface + PD protocol, can speed up the heating speedparameter:Input interface: Type-CPower supply: PD 65w 20v 3.25A (recommended for PD65w)Temperature range: 0C350C (the lowest temperature is the ambient temperature, which can only be raised but not lowered)Shell: high-quality 3D printed shell, no delaminationProduct size: length 5.6 cm, width 5.6 cm, height 3.5 cmInstructions:Double click and press at the same time: heat or stop heatingDouble-click and long press to enter the menu interface or exitDouble click to confirmNote: It is recommended that the temperature not exceed 250Ccommon problem:Q: How many volts does the power supply need?Answer: You need a charger that supports the PD protocol with a voltage of 20V 3.25A. In theory, it can support the PD protocol with a voltage of 220VQ: Why does heating start from a black screen and restart?Answer: This problem triggers the charger protection and needs to be replaced with another charger or data cable, most of which cause the charger model to be recordedPackage Included:Heating table X1F