It's a fill light, 2500-6500K and brightness both adjustable, built-in diffuser, Also a mini speedlite, around 6500K. Support to flash when shoot by smartphone. Charge by type-C cable, compatible with most mirrorless cameras. Instructions: 1. Long press the power button for more than 3 seconds to turn on or off the lights. If not used for a long time, please turn off the power, avoid light, and store in a dry place. 2. It has two lighting modes: Bi-Color fill light mode, Flash mode. After turning on, short press the power button to switch between two modes. Bi-Color fill light mode: 1. Long press the power button to start. If both brightness and color temperature lights are on with the front LED panel, it's in Bi-color fill light mode. Otherwise, switch by short pressing the power button. 2. Adjust lighting color temperature and brightness for photos or videos. Use it handheld, attach to the camera's hot shoe, or use a cold shoe device. Flash mode for camera: 1. After starting, if only the brightness light is on, it's in flash mode. Otherwise, switch by short pressing the power button. 2. Test the flash when the button lights up red and the capacitor is fully charged. Face the light away from you. 3. Install onto the camera's hot shoe, lock the knob, and long press the power button to activate the flash. Set the camera to M mode for accurate exposure. 4. Flash does not support automatic exposure (TTL). Sync with shutter speed up to 1/250. Adjust power using the D button. 5. Designed for most cameras. Some may need additional settings. Flash mode for Smartphone: 1. Ensure it's in flash mode. Long press the photography button and turn on your phone's b1uet00th. Scan for "VLOGLITE" and pair. 2. Blue light flashing means searching. Steady blue light indicates successful connection. 3. Open camera mode, aim, Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.