Feature: 1. Microwave / radar sensor switch, the sensing distance is 12 meters directly in front, and the sensing angle is wide 2. 5.8G frequency, normal installation and use do not interfere with each other, high stability and strong anti-interference ability 3. Small size, suitable for various products requiring DC microwave modules 4. Made of high quality material, durable and long service life 5. High quality and good workmanship, easy to install Specification: Item Type: Microwave Radar Sensor Switch ModuleModel: HFS-DC06 Frequency: 5.8G Band: ISM band Size: Approx. 39 x 22 x 11mm / 1.5 x 0.9 x 0.4in Minimum Input Current: 30mA Output Mode: 5V level signal (output high level when triggered) Wiring Method: VCC is connected to the positive pole of the power supply, GND is connected to the negative pole of the power supply GND and OUT connected to level signal output Installation Height: 2-6 meters Induction Distance: 12 meters directly in front Induction Angle: Conical 360 degrees in front Induction Time: For the convenience of testing, the induction delay time is set at 2S Product Features: 5.8G frequency, normal installation and use do not interfere with each other, high stability, strong anti-interference ability, small size, suitable for various products that require DC microwave modules. Package List: 1 x Microwave Radar Sensor Switch Module Note: 1. The power supply current must be greater than 30mA to drive the module, and the voltage must be stable without large fluctuations, otherwise it will cause continuous triggering (the load light may be continuously triggered by itself or not extinguished)2. The product should not be installed next to a large-area metal body, and cannot be placed in a completely enclosed metal shell, which will affect the performance of this product or cause it to be unable to be used normally.