Feature:1. Microwave / radar sensor switch, the sensing distance is 12 meters directly in front, and the sensing angle is wide2. 5.8G frequency, normal installation and use do not interfere with each other, high stability and strong anti-interference ability3. Small size, suitable for various products requiring DC microwave modules4. Made of high quality material, durable and long service life5. High quality and good workmanship, easy to installSpecification:Item Type: Microwave Radar Sensor Switch ModuleModel: HFS-DC06Frequency: 5.8GBand: ISM bandSize: Approx. 39 x 22 x 11mm / 1.5 x 0.9 x 0.4inMinimum Input Current: 30mAOutput Mode: 5V level signal (output high level when triggered)Wiring Method: VCC is connected to the positive pole of the power supply, GND is connected to the negative pole of the power supplyGND and OUT connected to level signal outputInstallation Height: 2-6 metersInduction Distance: 12 meters directly in frontInduction Angle: Conical 360 degrees in frontInduction Time: For the convenience of testing, the induction delay time is set at 2SProduct Features: 5.8G frequency, normal installation and use do not interfere with each other, high stability, strong anti-interference ability, small size, suitable for various products that require DC microwave modules.Package List:1 x Microwave Radar Sensor Switch ModuleNote:1. The power supply current must be greater than 30mA to drive the module, and the voltage must be stable without large fluctuations, otherwise it will cause continuous triggering (the load light may be continuously triggered by itself or not extinguished)2. The product should not be installed next to a large-area metal body, and cannot be placed in a completely enclosed metal shell, which will affect the performance of this product or cause it to be unable to be used normally.