: these metal hold down brackets are made of reliable metal materials, strong, and , easy to install and less likely to deform or break; They are suitable for most blinds or and can you for a long time Appropriate size: It is suitable for most blinds and does not take up too much space; Before ordering, please check the size carefully and make sure they can match your or blinds Simple design: blind hold down brackets are simple in design, small in size, thus, they are difficult to be noticed; Using them to hold down most blinds not affect the overall appearance of the blinds, and you can enjoy the beautiful scenery from the as well Easy to apply: the installation and application of these tools are rather easy and convenient; , you put the pins into the holes of the brackets, and then reinforce them and you can successfully apply them; For more details, please refer to the installation steps below Proper ans simple appearance: These metal hold down brackets are simple in design, small in size, thus, they are difficult to be noticed. Using them to hold down most blinds not affect the overall appearance of the blinds, and you can enjoy the beautiful scenery from the as well.<br><br>Installation procedures: 1. What you need: drill, screwdriver, tape measure, hammer, pencil. 2. If the bottom rail is not fitted with pins, drill a . 1/2 inch deep 7/64 inch or 3/32 inch bit in the center to hold pins on both sides of the rail. 3. Punch the pins in. 4. Put the blind plate down, put the bottom rail flat in place, and mark the position of the fixed bracket with a pencil. 5. Screw the bracket to the door. 6. Measure the position of the bracket now screwed to the door and mark on the other side. 7. Then repeat the above steps to installthe second bracket. colour: silver Material: metal Size: About 42x32.2mm<br><br>Package Contents: 4 x Hold down brackets With screws 4 x Pi