Mechanical Timer Switch 110V-220V 24H Programmable 15Min Setting SUL181D

Product range: control range / industrial / complete / street light / lighting / farm / industrial control / home / household appliances Electrical life: (under power load) more than 100,000 times; Mechanical life: (DC) = 10 million times or more; Mechanical life: (AC) = 10 million times or more Insulation voltage: (between coil and contact) less than equal 1000VAC; Insulation voltage: (between contacts and contacts) less than equal 1000VAC Contact resistance less than equal 50Ohm Ambient temperature: -20 Celsius ~ +55 Celsius Time range: 24h/24 hours storage time 150/minimum setting unit 15 points/time total 96 Model: SUL181D Rated voltage: 250VAC Coil power supply: 230VAC Rated current: 16A Coil power: 0.2W Contact switching current: 16A Contact switching voltage: 250VAC Protective features: plastic type Contact load: 16A Contact form: 1H Frequency: 50~60 Hz Number of contacts: 1 Cycle: 24 hours Installation form: DIN rail Terminal block form: plug-in terminal Cycle: 4 hours Power outage retention hours: approximately 100 hours at 110 V Contact capacity at 250 V AC, cos Diameter = 1: 16 A Contact capacity at 250 V AC, cos Diameter = 0,6: 4 A Minimum switching time: 15 minutes Minimum setting interval: 15 min Time accuracy: Less than equal +/- 1 s/day (quartz) Output contact: 1c x 1 Switch output: Potential-free and phase- Number of switch segments: 96 Standby consumption: 0,5 W Test light: VDE Shell and insulation material: high temperature resistant, high temperature resistant, fire resistant thermoplastic material Protection level: IP 20 Security level: II as per EN 60 730-1 Applicable ambient temperature: -20 ~ +55 Celsius colour: white Material: ABS+ electronic components Package Contents: 1 * Programmable switch 1 * Instruction manual Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.