["Description:\r\nThe electromechanical hygrostat MRF012 is designed to control enclosure heaters , so that the dew point is raised when a critical relative humidity of 65% is exceeded. In this way condensation and corrosion is effectively prevented.\r\n\r\nSpecifications:\r\nSwitch difference:4% RH (±3% tolerance)\r\nPermissible velocity:15m/sec\r\nContact type:change-over contact\r\nContact resistance: 100 000 cycles\r\nMin. switching capacity: 20V AC/for DC 100 mA\r\nMax. switching capacity: 250 VAC, 5 (1) A for DC 20W\r\nEMC: acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3\r\nConnection:3-pole terminal for 2.5mm⊃2;, clamping torque 0.5Nm max.: rigid wire 2.5mm⊃2;,stranded wire (with wire end ferrule) 1.5mm⊃2;\r\nMounting: clip for 35mm DIN rail, EN50022\r\nCasing: plastic according to UL94 V-0, light grey\r\nDimensions: 67 x 50 x 38mm\r\nFitting position: variable\r\nOperarting/Storage temperature: 0 to +60°C (+32 to +140°F) / -20 to +80°C (-4 to +176°F)\r\nfor Protection type: IP20 \r\n\r\nNote:\r\nItem color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.\r\nPlease allow 1-3mm slight deviation due to manual measurement. Thank you! \r\n\r\nPackage include:\r\n1pc Humidity Controller"]