Maxmartt 3D Printer Extruder HGT Dual Drive Extruder Large Torsion Anti Slip for CR 10, CR 10S, Ender 3, Ender 3 V2 and CR6 SE R5IE7

₹2,499.00
और मुफ़्त शिपिंग

Maxmartt 3D Printer Extruder HGT Dual Drive Extruder Large Torsion Anti Slip for CR 10, CR 10S, Ender 3, Ender 3 V2 and CR6 SE R5IE7

  • ब्रांड: Unbranded
RRP: ₹3,649.00
मूल्य: ₹2,499.00
आपकी बचत: ₹1,150.00 (31%)
द्वारा बेचा गया:
₹2,499.00
और मुफ़्त शिपिंग

स्टॉक में है

हम निम्नलिखित भुगतान विधियाँ स्वीकार करते हैं

विवरण

Features APPLICABLE MODEL: This extruder is suitable for CR 10, for CR 10S, for ENDer 3, for Ender 3 V2 and for CR6 SE, check for better fit! Other models can be designed according to size and mounting holes, and can print consumables such as PLA, ABS, PETG, TPU, etc. (Note: Caompatible with 36 Stepper Motor) EASY INSTALLATION: The main structure is made of ABS material and molded with a mold, which is small in size and light in weight. Multi hole installation, convenient and flexible installation and adjustment. DUAL GEAR STRUCTURE: The dual gear structure has a higher gear ratio, increasing torsion to increase the thrust of the extruder. The integrated reduction gear eliminates the binding of the lifting rope to prevent slipping. The gears are small and light. PREVENT SLIPPING: The HGT extruder gear is an integral nickel plated gear and a new integral reduction gear, which eliminates the need for machine screw fixation, prevents slipping, and prevents slipping during printing. POSITIONING PIN: Locating pins are made of strong materials, which can reduce wear and prolong the service life of printing jobs. Specification: Item Type: Dual Drive Extruder Material: ABS, Nickel Plated Transmission Ratio: 5:1 Pulse: 680 Number of Main Transmission Gears: 10 Number of Deceleration Gears: 50 Number of Extruded Gears: 17 Support Consumables Specification: Approx. 1.75mm / 0.07in Mounting Hole Position: Side 2 M3 deep Approx. 5mm / 0.2in bottom 2 M3 deep Approx. 5mm / 0.2in Package List: 1 x Dual Drive Extruder 6 x Screw  1 x Washer  1 x Handle  2 x Hex Wrench  1 x Spring  1 x Pneumatic Fitting Note: Must be used with a 36 type stepper motor, not compatible with a 42 type stepper motor. Package List 1 x Dual Drive Extruder 6 x Screw 1 x Washer 1 x Handle 2 x Hex Wrench 1 x Spring 1 x Pneumatic Fitting
  • Fruugo ID: 383674821-825867736
  • EAN: 9789622052246

उत्पाद सुरक्षा जानकारी

कृपया नीचे दी गई इस उत्पाद से संबंधित विशिष्ट उत्पाद सुरक्षा जानकारी देखें

निम्नलिखित जानकारी इस उत्पाद को बेचने वाले स्वतंत्र तृतीय-पक्ष खुदरा विक्रेता द्वारा प्रदान की गई है।

उत्पाद सुरक्षा लेबल

CE Mark
सुरक्षा चेतावनियाँ: Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.
सामग्री: As shown in the figure

डिलीवरी और वापसी

2 दिनों के भीतर भेजा जाएगा

  • STANDARD: मुफ़्त - के बीच वितरण शुक्र 24 अक्तूबर 2025–गुरु 30 अक्तूबर 2025 - मुफ़्त

चीन से शिप हो रहा है।

हम आपके द्वारा ऑर्डर किए गए उत्पादों को पूरी तरह से और आपके विनिर्देशों के अनुसार डिलीवर करने की पूरी कोशिश करते हैं। हालाँकि, यदि आपको अधूरा ऑर्डर या आपके ऑर्डर से कोई अलग आइटम प्राप्त होता है या किसी अन्य कारण से यदि आप अपने ऑर्डर से संतुष्ट नहीं हैं तो आप ऑर्डर या ऑर्डर में शामिल कोई भी उत्पाद वापस कर सकते हैं और आइटम के लिए पूर्ण रिफ़ंड प्राप्त कर सकते हैं। सम्पूर्ण वापसी पॉलिसी दिखाएँ