Feature:1. SCOPE OF APPLICATION: This charging control module can be widely suitable for 660V any battery, lithium battery, easy to use2. LCD DISPLAY: The module adopts LCD display, the battery voltage, charging percentage and charging time can be seen at a glance3. MULTIPLE FUNCTIONS: Very powerful, can automatically charge control, can control the charging time, can set and upload the corresponding parameters through the serial port4. BASIC SPECIFICATIONS: The module control voltage is DC660V, control current is 10A, and the control accuracy is 0.1V5. PCB MATERIAL: This overcharge protection switch is made of high quality PCB material, and which output type is direct outputSpecification:Item Type: Lithium Battery Charge Control ModuleMaterial: PCBModel: XY-L10AControl Voltage: DC6-60VControl current 10AControl Accuracy: 0.1VOutput Type: Direct OutputVoltage Error: 0.1VScope Of Application: Various Lithium Batteries1. Function Description1. Automatic Charging Control Function: By setting the upper limit voltage UP and lower limit voltage dn, when the battery voltage lower limit voltage dn, the relay is turned on, and the charger starts to charge the battery, when the battery voltage the upper limit voltage UP, the relay is turned off to complete an automatic charging2. Charging Time Control Function: How to turn on the time control function?After Entering The Parameter Setting, If The Parameter Op Is Not set to 0, the time control function is enabled. The default parameters of OP are: --: --h, and the time control function is not enabled by defaultAfter The Time Control Function Is Turned On (op Is Not 0), when the battery voltage is less than the lower limit voltage dn, the charger starts to charge the battery, and the system starts timing, during the timing period, the battery voltage the upper limit voltage UP, the relay is disconnected, if the battery voltage