100mW transmission power - The third generation remote control has a built-in 100mW ELRS2.4G high-frequency . The transmission power supports 25mW, 50mW, and 100mW. for multiple uses - Supports external high-frequency with Nano interface, supports CRSF protocol output Supports BATEFPV Configurator host computer firmware upgrade Parameter configuration (such as mixing control, etc., supports fixed-wing models, etc.) Supports multiple simulators without dongles - Simulators supported by the remote control (including but not limited to) Liftoff/DRL//FPV AIR 2 Al Drone Simulator/Orqa FPV. 2000mAh battery for flying all day - Built-in 2000mAh 1S battery Adopts ergonomic handle, enhanced grip feel Full battery life is easy to 15 hours, and it is using the Type-C interface. The section lever is safe and - The joystick has been upgraded and its service life has been greatly improved Two-stage lever and three-stage switch lever, refusing misunderstanding lock. Channels:8 Supported protocol: Applicable drone type:multi-rotor/fixed-wing Support USB firmware update Support Simulator connection Custom LlteRadio system Joystick calibration LED light:Green power on Red warning Blue normal Battery:built-in 2000mAh 1s battery Charging connector:Type-C Due to different batches, the printed words on the product will be different, which does not affect use. Type:B:American Hand Colour:White Material:Plastic Package Contents: 1 * Remote Control 2 * Remote Control Covers 1 * Charging Cable 1 * Chinese and English instruction manual Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.