Liquid Level Sensor Stainless Steel Liquid Water Level Sensor Float Switch for Pool Can 75mm

Features It adopts 304 stainless steel and 316L material, very durable. It can work at a temperature as high as 120℃. It can work in AC 0-220V and DC 0-200V, which is suitable for most power sources. It can support a maximum of 5Mpa, which allows it to work in most environments. 100% brand new and high quality. Specification: Operating voltage: 0~220V Working current: 0.5-1A Material: SUS304 SUS316 Operating Temperature: 0~120℃ Maximum Temperature Tolerance 120°C Working pressure: 1 Mpa Maximum holding pressure: 5 Mpa Maximum power: low voltage: 10 W. High voltage: 50 W. Maximum switching current: low voltage: 0.5A high voltage: 1.5A Package list: 1 x liquid level sensor. Note: 1. As different computers display colours differently, the colour of the actual item may vary slightly from the above images. 2. Please allow for a 1 - 3 mm margin of error due to manual measurement. Please note: The floating ball is made entirely of 304 stainless steel, the clip spring is made of 316L material. Low voltage refers to the floating ball switch that can be used in a DC voltage circuit from 0 to 110V. High voltage means the floating ball switch can be used in AC 0~220V, DC 0~200V line. The high temperature should indicate that the float switch can long-term withstand a temperature of 120 degrees. High temperature and high pressure are white silica gel high temperature line, low pressure is common black line The floating ball switch cannot directly control the solenoid valve or high-power relay, AC contactor, etc.Add a small relay to make the transition. Travel floating ball 10 mm, i.e. control range 10 mm, if the control range can be large 2 combinations, 1 long installation and 1 short. Package List