Liquid Level Sensor Non-Contact Liquid Level Sensor Water Level Sensor Detection Tool Cable Length 45cm/48inches

["The liquid level sensor has no special requirements for liquid type and container materials and can be widely used.\nThe installation is simple and does not affect the production.\nThe output signal is NPN signal.\n\nSpecifications:\nProduct model:XKC-Y26-NPN\nInput voltage (Vin): for DC 5~12V\nOutput Signal:NPN\nCurrent consumption: 5mA\nOutput voltage (high level): Vin\nOutput voltage (low level): 0V\nOutput current: 1~100mA\nResponse time: 500mS\nWorking environment temperature: 0~85°C\nHumidity: 5%~\nMaterial: ABS\nWaterproof performance: IP65\nSIze:18 x 13 x 11mm\nCable Length:45cm\n\nSensitivity:\nPipe outer diameter D(mm) Sensing wall thickness L(mm)\n D ≥ 100, L: 20±2\n100＞100 ≥ 80, L: 15±2\n 80＞100 ≥ 60, L: 12±2\n 60＞100 ≥ 40, L: 7±1\n 40＞100 ≥ 30, L: 5±1\n 30＞100 ≥ 20, L: 3±1\n 20＞100 ≥ 10, L: 1.5±0.5\nApplicable pipe diameter range: ≥10mm\nLevel error: ±1.5mm\n\nDescription\nIntelligent non-contact type level detector(Hereinafter referred to level detector) adopts advanced signal processing technology and high speed signal processing chip, break through the effects of vessel wall thickness, realized the real non-contact measurement for the level height in the sealed vessel. Level sensor(probe) installed on the top and bottom(the high level and the low level) of the measuring vessel wall, non-metal vessel do not need to drill a hole, easy installation, good for the production. Can be used for different kinds of toxic, strong acid, strong alkali, and all kinds of level measurement in the high pressure sealed vessel or for tank. The application of this product is very wide, no special requirements for liquid media and vessel material.\n\nProduct Feature\n1: XKC-Y26-NPN suitable for non-metal pipe wall, and do not need to contact the liquid, will not corrode by strong acid, strong alkali, and other corrosive liquid. Will not affected by incrustation or other impurities.\n2: Intelligent level adjustment and level memory function, level status display method, can realize multi points series connection,\nFeature:\nIt achieves non-contact detection of the liquid level in the closed container.\nThe liquid level sensor is installed on the upper and lower sides of the container (the liquid level is high and low)\nThe non-metallic container does not need to open the hole. \nCan detect the level of various toxic substances, strong acids, alkalis and various liquids in high pressure tight containers\n\nPackage include:\n1pc Non-contact Liquid Level Sensor\n1pc Fixed belt"]