Feature: 1. Main body made of aluminum alloy, light weight and strong, friction‑resistant and quiet, scratch‑resistant, drop‑proof, and corrosion‑resistant 2. The product using PI control algorithm to realize low noise, low vibration and low heat 3. Convenient current setting, 16 levels optional, the peak output current can be up to 2.2A 4. Possess automatic parameter adjustment function for different motors. Can drive 4, 6, 8 wire 2‑phase stepping motors 5. Provide overvoltage, undervoltage alarm, phase current overcurrent protection, motor phase open circuit detection and other functions 6. The pulse, direction and enable terminals all have constant current input functions, can directly connect to the input signal. No need external series resistance buck current‑limiting protection 7. Multi‑layer board and surface mount seal is adopted, possess high reliability, enough margin for power devices Specification: Item Type: Linear Stage Material: Aluminum alloy Model: SPR6011 Moving Direction: Θ axes Table Size: Diameter approx. 60mm / 2.4in Table Height: Approx. 35mm / 1.4in Moving Amount（°）: ±5.5 Load(kg): 6 Resolution (°): 0.0106 Maximum Speed (°/s): 21.2 Single-Phase Positioning Accuracy (°): 0.05 Repeat Positioning Accuracy (°): 0.005 Parallelism (μm): Within 30 Idling (°): 0.005 Sensor: NPN open circuit output limit + origin 2-Phase Stepping Motor: 1.3A/phase Power Supply: Up to DC48V Input Pulse Frequency: Maximum 300KHz How to Use: 1. Install the sliding table 2. Connect the drive data cable. Package List: 1 x Linear Stage1 x Data Line1 x Drive3 x Bolt