The LD24AJTA_MINI is a continuous conduction mode inductive step-down converter, designed for driving single or multiple series connected LED fficiently from a voltage source higher than the total LED chain voltage. The device operates from an input supply between 6V and 25V and provides an externally adjustable output current of up to 910mA. Depending upon the supply voltage and external components, the LD24AJTA_MINI can provide more than 22 of output power. 6-25V 910mA Step-down High Brightness LED Driver with 5000:1 Dimming Working voltage : DC 6-25V(Perfect for 6V 9V 12V 18V 24V LED Driver) Output Current: 30-910MA;By changing the RCS resistance, the maximum current can reach 1.2A Maximum output power: 22W(24V) Current regulation: 1 through adjustable resistance; 2 through PWM control Single pin on/off and brightness control using DC voltage or PWM Up to 1MHz switching frequency Typical 5% output current accuracy Inherent open-circuit LED protection High efficiency (up to 97%) High-Side Current Sense Hysteretic Control: No Compensation Adjustable Constant LED Current Typical application: Low voltage replacement LEDs Automotive lighting Low voltage industrial lighting LED back-up lighting Illuminated signs SELV lighting LCD TV backlighting By modifying the RCS potentiometer, the maximum output current can be adjusted to 1.2A (pay attention to enhance heat dissipation) Color: White Material: PCB Specification: 1 piece Package Contents: 1*LED Driver Module Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.