Label Printer Intelligence Thermal Printer for Jewelry for Hospital for Express Logistics            Feature: 1. Simple and easy to use, multifunctional buttons, dual color LED indicator, more convenient to use    2. Supports continuous printing for a long time, with accurate printing, stronge sensitivity and higher stability. With the movable clip, the printing is more accurate    3. Multiple interfaces are widely used. USB interface is standard. It is suitable for express logistics, jewelry, hospitals, clothing retail, government office and chain supermarkets    4. Intelligent automatic temperature control can prevent damage to the print head for a long time    5. Can be used as a variety of small life labels, homework assigned by teacher can be directly printed and recorded as a handbook       Specification:                Item Type: Label Printer Material: ABS Purpose: It is Suitable for Express Logistics, Jewelry, Hospital, Clothing Retail, Government Office and Chain Supermarket Australian Regulation: 100-240V Printing Method: Thermal Printing Resolution: 203 DPI Printing Speed: 152 mm/s Maximum Printing Width: Approx. 108mm / 4.2in(Smaller Printing Paper Can Be Used) Maximum Printing Length: Approx. 1778mm / 70in(Smaller Printing Paper Can Be Used) Size: Approx. 16.4 x 21 x 15.5cm / 6.5 x 8.3 x 6in                    Package List:    1 x Printer    1 x User Manual     1 x Drive Disc     1 x Plug     1 x Adapter     1 x USB Cable     2 x Fixing Piece     1 x Paper Reel        Note: 1.Please turn off the power switch of the printer and insert the power cord into the power slot of the printer       2.Please allow 0 to 2 cm error due to manual measurement. Thanks for your understanding               How to use:        To install a printer:        1. Please place the printer on a stable surface and confirm that the power is off        2. Connect the connectors at both ends of the USB data cable to the printer and the computer host respectively        3. Insert the power cord into the power socket behind the printer, and then insert the other end into the AC socket        Installation label:        1. Pass the paper reel through the paper reel cover（ If the axis of the paper roll you use is 1 inch, please remove the brown sleeve of the 1.5inch paper roll from the fixing piece and use the paper roll directly.)        2. Push the cover opening hook forward with both hands to open the upper cover of the printer        3. Place the label roll on the label base. Print side up        4. Pass the label through the paper guide, and then pull the label over the rubber roller        5. Move the paper guide to the same width as the label and make slight contact        6. Hold the upper cover of the printer, and then slowly cover the upper cover        7.