KINGBOLEN YA200 OBD2 Car Fault Diagnosis Tool Fault Analyzer Function 1. Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs) 2. Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors. 3. Data Stream: Reads and displays live ECUPCM data stream, plotting functions graphically and stores freeze frame data. 4. IM Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing. 5. Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display. 6. View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. 7. O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle on-board computer. 8. On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems. 9. Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc. 10. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability 11. Languages supported: English, French, Russian, German, Italian, Spanish, Portuguese, Polish, Traditional Chinese Supported Protocol 1. SAE J1850 PWM (41.6 Kbaud) 2. SAE J1850 VPW (10.4 Kbaud) 3. ISO 9141-2 (5 baud init, 10.4 Kbaud) 4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud) 5. ISO14230-4 KWP (fast init, 10.4 Kbaud) 6. ISO15765-4 CAN (11bit ID, 500 Kbaud) 7. ISO15765-4 CAN (29bit ID, 500 Kbaud) 8. ISO15765-4 CAN (11bit ID, 250 Kbaud) 9. ISO15765-4 CAN (29bit ID, 250 Kbaud)