KINGBOLEN YA100 OBD2 Car Engine Fault Diagnosis Tool Functions: 1. Read codes: show the detailed description of the Diagnostic Trouble Code (DTCs) 2. Erase codes: turns off Check Engine Light (MIL), clears codes and resets monitor. 3. Read data stream: reads and displays live ECUPCM data stream. 4. IM readiness status: shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing. 5. View freeze frame data: check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. 6. O2 sensor test: allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicles on-board computer. 7. EVAP test: performs EVAP system test to detect any leak in the EVAP system of vehicle. 8. On-board monitor test: retrieves and displays test results for emission-relatedPowertrain components and systems. 9. Read vehicle information: display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc. 10. Component test: certain vehicle components can be actuated by commands sent from the scanner to test their operability. Protocols: 1. SAE J1850 PWM (41.6 Kbaud) 2. SAE J1850 VPW (10.4 Kbaud) 3. ISO 9141-2 (5 baud init, 10.4 Kbaud) 4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud) 5. ISO14230-4 KWP (fast init, 10.4 Kbaud) 6. ISO15765-4 CAN (11bit ID, 500 Kbaud) 7. ISO15765-4 CAN (29bit ID, 500 Kbaud) 8. ISO15765-4 CAN (11bit ID, 250 Kbaud) 9. ISO15765-4 CAN (29bit ID, 250 Kbaud) Specification: 1. Screen Size: 1.8 inches TFT Color Display 2. Resolution: 128 x 64 pixel 3. Unit: MetricImperial 4. Working Voltage Range: 8~18V 5. Dimension: 125mm x 65mm x 22mm 6. Operating Temperature: 0~60 degree Celsius 7. StorageTemperature: -20~70 degree Celsius 8.Supports 11 languages: English, French, Russian, G