K+ CAN Commander 1.4 Chip OBD2 Scanner USB Cable Diagnostic Tool for K-Line Commander Features: 1. Diagnostic via CAN and Special Function via K-Line. 2. Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80). This allows the user to investigate and diagnose some new units not accessible with other diagnostic tools. Functions are under CAN-TP2.0. 3. Manual definition of running diagnostic session C, unlike other diagnostic tools that use standard diagnostic session 0x89. Function is under CAN-TP2.0. 4. Broa ast diagnostic request disables normal communication, clears DTCs, and enables Logistic (transport) mode. Functions are under CAN-TP2.0. K+CAN Commander Software version 1.4 Diagnostic Cable diagnoses via CAN and special functions via K-Line; Works for models up to September 2006; Works for models up to 2007. Functions: 1. Odometer correction in instrument clusters and E 15x. 2. Read Security Access Code/Login. 3. Read/program immobilizer data. 4. Read/write EEPROM from instrument cluster/immobilizer. All supported clusters CAN/K. 5. MMI TV Activation. 6. Read/Write EEPROM of Engine Control Units -E 15x, -ME7.1.1, -Cartronic ME7.8. 7. Key learning buttons for easy usage (no security code required). Supports component security authorization. 8. Key learning for K+CAN (no security code required). 9. Custom memory reading from different units like ECUs, EZS-Kessy. 10. Reading flash memories E 16x, E 15x, ME7x, MED951, MED751 (programming of flash memories will be available with next update). 11. Crash data clear in units. Color: Black Material: ABS Package Contents: 1 x K+CAN Commander V1.4 Cable 1 x CD Driver Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture to appear slightly different from the real thing. Measurement allowed error is +/- 1-3 cm.