Features: _x000D_ IP67 waterproof power supply, suitable for both outdoor and indoor use, not afraid of rainy, foggy strong sunlight and other harsh environments. _x000D_ The 24V 60W LED driver transformer is widely used for LED spotlights, LED strips, LED street lights, LED bulbs, LED buried lights, LED ceiling lights and other LED lamps. _x000D_ Constant voltage output to ensure the stability of the power supply. _x000D_ The power supply is sealed with high quality aluminum housing, rustproof and anti-corrosion, quick heat dissipation. _x000D_ Overvoltage, Overcurrent, Overheat and Short Circuit protection for safety use. _x000D_ _x000D_ _x000D_ Specification: _x000D_ Item Type: LED power supply _x000D_ Modulation Method: Pulse width modulation (PWM) _x000D_ Transistor Connection Method: Full-Bridge _x000D_ Input Voltage: 100-264V _x000D_ Output Voltage: 24V _x000D_ Output Power: 60W _x000D_ Output Current: 2.5A _x000D_ Work Efficiency: 95% _x000D_ Output Ripple Noise: 85mv _x000D_ Output Voltage Accuracy: 5% _x000D_ Voltage Regulation Rate: 5% _x000D_ Load Adjustment Rate: 5% _x000D_ Operating Temperature: -30~40 _x000D_ Dimensions: 18.5x3.5x2.5cm / 7.3x1.4x1.0in _x000D_ _x000D_ Package List: _x000D_ 1 x LED Power Supply Driver _x000D_ _x000D_ Note: _x000D_ 1. You must connect the lighting load at first, and then power on. _x000D_ 2. All leads are avoided from direct contact with the capacitive surface. _x000D_ 3. When assembling the luminaire, do not squeeze strongly to avoid deformation and damage of components. _x000D_ 4. Avoid direct contact between the exposed leads and the metal lamp housing. _x000D_ 5. After the power supply is assembled into the luminaire, it is necessary to carry out aging test for more than 24 hours according to the actual situation to ensure the quality of the luminaire product. _x000D_ 6. Try to avoid the electrolytic capacitor casing in the power supply directly contacting the casing of the lamp. _x000D_ 7. All power leads must use high temperature wires.