Incubator Temperature Controller with Lamp Automatic Water Bed Egg Incubator Thermostat

Feature:1. Incubation Temperature Control: The automatic incubator controller with egg lamp allows for precise temperature control during the incubation process, ensuring optimal conditions for successful hatching.2. Easy to Use: With its user friendly design and intuitive interface, this incubation temperature controller makes it effortless to set and monitor the temperature, suitable for both beginners and experienced breeders.3. Temperature Range: The incubator temperature controller maintains a stable temperature range of 0‑99℃, creating a reliable and consistent environment for eggs to develop and hatch.4. With Egg Lamp: The included egg lamp provides essential lighting for monitoring eggs without disturbing them. This ensures that you can keep an eye on their progress without compromising their development.5. Temperature Calibration: The temperature control function can be easily calibrated to ensure accurate readings. This feature allows you to fine tune the temperature settings for optimal incubation conditions.Specification:Item Type: Incubation Temperature ControllerSize: Approx. 12.2 x 6.5cm / 4.8 x 2.6inTemperature Display Range: 0-99℃Temperature Resolution: 0.1℃Output: 1 Heating, 1 Egg LampRelative Humidity: Less than 85%Ambient Temperature: -20℃-70℃Weight: Approx. 193g / 6.8ozMaterial: ABSIn the normal working state, click the setting key (short press), the instrument enters the reference temperature parameter setting.Reference Temperature Setting Parameter: 0.0-99.9℃Factory Default Value: 37.8℃In the normal working state, hold down the set and Increase keys for more than 3 seconds at the same time (long press), and the instrument enters the temperature calibration setting.Temperature Calibration Settings: Can be adjusted according to the thermometerIn the normal working state, hold down the increase and decrease keys for more than 3 seconds (long press), the instrument restores the factory value.Control Function: 1. Heating Function: When the temperature TH1<PP, start heating; When the temperature TH1>PP, turn off the heating.2. Egg Lighting Function: Under normal working condition, click egg lamp key to start egg lighting; Tap egg lamp key again to turn off the light egg.3. Calibration Function: The temperature sensor may be deviated for a long time, which can be calibrated by an accurate thermometer. Hold down the Set and increase keys at the same time, the display blinks to display the sensor temperature, and click the Add and subtract keys to adjust the sensor temperature as the thermometer.4. Sensor Error Indication: When the temperature sensor fails or is not connected, the temperature display window displays EE, and the electric heating stops working..Package List:1 x Incubation Temperature Controller1 x Power Cord1 x Crocodile Clip Wire