1. Complies with J1772 standard 2. Sleek design with protective cover, supports front installation 3. Pin head features safety insulation to prevent accidental contact; protection level reaches IP54 4. Type: European to American adapter 5. Use: Charging Mechanical behavior: 1. Mechanical life: 10,000 cycles (no-load plugging and unplugging) 2. Insertion force during coupling: Less than 80N (minimum 45N) Electrical performance: 1. Rated working current: 16A or 32A 2. Working voltage: 110V–250V 3. Insulation resistance: 1000MΩ (DC500V) 4. Terminal temperature rise: Less than 50K 5. Withstand voltage: 2000V 6. Contact resistance: Maximum 0.5mΩ Temperature: 1. Working environment temperature: -30°C to +50°C We recommend the following steps: 1. Plug the Type 2 end of the adapter into the charging cable 2. Plug the Type 1 end of the adapter into the vehicle’s charging socket 3. Once the adapter clicks into place, charging can begin Remember to activate the charging station When charging is complete, disconnect from the vehicle side first, then from the charging station side. Remove the adapter from the charging station when not in use. Material: Thermoplastic Color: Black Package Contents: 1 x Electric Charging Adapter Note: The package includes only the items listed above. Other accessories are not included. Lighting and display settings may cause slight variations in color compared to the actual product. Measurement error allowed: +/- 1–3 cm.