Features: <br> <br>Built-in self-test circuit for easy mass production testing without adding extra expensive test equipment. <br>It is a calibration-free, low-power, low-cost electronic compass module. <br>Built-in 12-bit A/D, OFFSET, SET/RESET circuit, there will be no magnetic saturation, and there will be no accumulated error. <br>The automatic calibration procedure is supported, and the steps of use are simplified, and the terminal product is very convenient to use. <br>1.8V supply voltage, sleep mode 2.5 microamps, measurement mode 0.1mA low power consumption. <br> <br>Specification: <br>Pin Spacing: 2.54mm (100mil) <br>Digital Output: 2C Digital Output Interface, Very Convenient To Design And Use <br>Accuracy: 1-2 Degrees <br>Supply Voltage: 1.8V <br>Power Consumption: Sleep Mode: 2.5 Microamps, Measurement Mode: 0.1mA <br> <br>Package List: <br>1 x For PCB Board <br>1 x Accessories 1、Built-in self-test circuit for easy mass production testing without adding extra expensive test equipment. <br>2、It is a calibration-free, low-power, low-cost electronic compass module. <br>3、Built-in 12-bit A/D, OFFSET, SET/RESET circuit, there will be no magnetic saturation, and there will be no accumulated error. <br>4、The automatic calibration procedure is supported, and the steps of use are simplified, and the terminal product is very convenient to use. <br>5、1.8V supply voltage, sleep mode 2.5 microamps, measurement mode 0.1mA low power consumption.