Features: The hood lock of a general car is a one-point design, which is not very strong and will open at a touch. Therefore, it is necessary to replace it with this pull-out racing hood lock, which tightly fastens the hood like a latch, and will not open even if it is hit violently. For professional rally cars, the hood lock is installed as an extra. Description: A car front hood lock that can ensure and meet the convenience and flexibility of opening and closing. Its characteristic is that a rotatable lock hook is installed on the right side of the lock body. The upper part of this lock hook is a hook, and the lower part is a guide sleeve. The guide sleeve is equipped with a compression spring and a positioning pin. The positioning pin is sealed with a switch plug and a lever. The lever is connected to the switch connecting rod and the pull wire and the pull handle. The pull handle is installed in the cab. The left side of the lock body is designed with a lock inner ratchet. When the front hood of the car is pressed down, the lock hook rotates 45° around the lock buckle to firmly hook the lock buckle. The positioning pin is forcibly pushed into the positioning hole by the compression spring. The lock inner ratchet hooks the lock hook. The lower part of the lock inner ratchet is also controlled by the switch connecting rod, forming a long-closed state, achieving the purpose of reliability. When it is time to open, pull the pull handle, move the switch connecting rod, pull the lever, pull out the positioning pin, and the lock buckle is forced out of the lock body by the opening tension spring, meeting the conditions of convenient and flexible opening. Name:Hood Lock Type:Auto Parts Colour:As Shown Material:Metal Package Contents: 1 Set x Hood Lock Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allo