Item Type: Temperature Humidity Transmitter Product Size: Approx. 147 x 88 x 41mm / 5.79 x 3.46 x 1.61in Dust Proof Protection Grade: IP65 Power Supply Wiring: Wide voltage 10~30V DC power input; for 0-10V output devices, 24V power supply is required Output Interface Wiring: The device has 2 independent analog outputs as standard configuration Material: ABS Weight: 157g / 5.5 oz (approx.) Specific Wiring: Circuit Identification: VCC Positive power Circuit Identification: GND Negative power / negative signal Circuit Identification: TH Positive temperature signal Circuit Identification: RH Positive humidity signal Parameter: DC Power Supply (default): DC 24V Maximum Power Consumption: - Current Output: 1.2W - Voltage Output: 1.2W Accuracy: - Humidity: 2%RH (60%RH, 25C) - Temperature: 0.4C (25C) - Humidity (alternative): 3%RH (60%RH, 25C) - Temperature (alternative): 0.5C (25C) Temperature Range: -40C to +120C (default range: -40C to +80C) Humidity Range: 0%RH to 100%RH Transmitter Circuit Operating Conditions: -20C to +60C, 0%RH to 95%RH (non-condensing) Probe Operating Temperature: -40C to +120C (default: -40C to +80C) Probe Operating Humidity: 0%RH to 100%RH Long Term Stability: - Humidity: 1%RH/year - Temperature: 0.1C/year Response Time: - Humidity: 8 seconds (1m/s airflow) - Temperature: 25 seconds (1m/s airflow) Output Signal: 0~10V voltage output Load Capacity: - Voltage Output: Output resistance 250 - Current Output: Load resistance 600 Hole Size: Approx. 70mm / 2.76in Parameter Settings: Configurable via software or buttons Product Selection: RS Other standards WS Temperature humidity transmitter sensor V10 0~10V voltage output Common Problems and Solutions: No Output or Wrong Output Possible Causes: 1. Incorrect range setting causing PLC calculation error. Refer to technical specifications. 2. Incorrect wiring method or sequence. 3. Incorrect power supply voltage (24V required for 0-10V type). 4. Excessive distance between transmitter and collector causing signal interference. 5. Damaged PLC acquisition port. 6. Equipment damage. Features: 1. Stable and compact design with high-accuracy temperature and humidity measurement unit, ensuring long-term stability and small footprint. 2. Wide operating range with dedicated analog circuit and 10~30V wide voltage power supply for enhanced practicality. 3. Supports wall or rail mounting. IP65 rated for high dust resistance and protection against rain and snow, with good breathability. 4. Equipped with industrial-grade microprocessor chips and imported high-accuracy temperature and humidity sensors for reliable performance, high accuracy, and interchangeability. 5. Standard 0~10V analog signal output compatible with on-site digital displays, PLCs, inverters, industrial control hosts, and other equipment. Safe, reliable, and easy to install. Package Includes: 2 x Screw 2 x Wall Plug 1 x Transmitter 1 x User Manual Notes: - 24V power supply required for 0-10V output type. - Communication line not included by default. Wire color is for reference only.