Feature:1. Especially suitable for measuring car standby current, leakage current, surge current.2. The product has the characteristics of small size, high accuracy, strong antiinterference ability and automatic transmission.3. It is suitable for rapid detection of vehicle leakage, current consumption detection, rapid detection of disconnection and leakage, equipment escaping electricity, line and iron contact, measurement of motor inrush current and alternator charging current and other faults.4. The fields include automobile maintenance, automobile factory testing, automobile parts testing, current detection in telecommunications room, electrical maintenance, weather, oil detection, etc.5. Stable working performance and good working condition. Made of high‑quality plastic material, durable in use and has a long service life.Specification:Condition: 100% NewItem Type: Clamp MeterMaterial: PlasticFunction: AC leakage current measurement, AC current online measurementPower Supply: Zinc manganese dry battery, 6F22, 9V Test Mode: Clip-on CT, integral modeDisplay Mode: 4-digit LCD displayLCD Size: Approx. 35 x 21.5mm / 1.4 x 0.8inDisplay Area: Approx. 32 x 15mm / 1.3 x 0.6inSampling Rate: About 2 times / secFrequency: 50 / 60Hz automaticRange Switching: AutomaticAccuracy (233, lower than 70%RH): 0.00-60.00A: 1.5%5dgtVoltage Range: AC600VRS232 Interface: Store data in the memory of the instrument via RS232, or upload to PC or online monitoringStorage: 99, all used when full displaySummit Hold: Press and hold without releasing, the meter will display the summit value during pressingReading Hold: DH means reading holdOut of Range: OL means the current is out of rangeAutomatic Shutdown: Automatically shutdown after 5 minutes of startup to reduce power consumptionBattery Voltage: Indicates that the battery voltage is lower than 7.2V. Then the battery must be replaced.Consumption: About 5mWTemperature and Humidity: Working: 0-40, lower than 80%rhStorage: -10-60, less than 70% rhInsulation Strength: AC2kV / rms (between clamp alloys) And housesApplicable Safety Rules: IEC1010-1, IEC1010-2-032, pollution etc. 2 CAT II (600V)Battery: 9V alkaline battery (Not Included).Package List:1 x Clamp Meter (Battery Not Included)1 x Adapter Connector1 x Card Disc1 x Manual1 x Packaging Bag